Reactor E-10 Proportioner Package, 120 V, 1PH (Gun not included)
Graco’s Reactor E-10 Proportioner Package is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups.
With smart controls that are easy to setup and simple to operate, the E-10 Proportioner Package is a natural complement to any proportioning equipment line-up.
For smaller polyurethane foam or polyurea projects or touch-ups.
- Small size
- Ideal for on-site portability and hard-to-reach areas
- Cost Savings
- One-person operation saves time and money
- Extent your spray business
- Use as an add-on to your existing spray business
- Versatile
- Switch from cold spray to hot spray to foam
- Material savings
- Saves 30% on material costs compared to disposable foam systems
- Electric power
- Low draw and plugs into standard outlets
- Single Knob Operation
- Intuitive start, stop and digital temperature display with single knob operation
- Easily balancing
- Pressure balance valves give you quick and easy balancing of system pressures
- Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
- Easy-to-service fluid section
- Reduces maintenance and increases productivity
- Electric motor
- Improves performance and reduces operating costs
Technical Specifications
| AIR INLET SIZE (CM) | 0.635 |
|---|---|
| AIR INLET SIZE (IN) | 1/4 |
| AIR INLET SIZE (MM) | 6.35 |
| AIR INLET THREAD TYPE | Quick-Disconnect Pin |
| AIR OUTLET SIZE (CM) | 0.635 |
| AIR OUTLET SIZE (IN) | 1/4 |
| AIR OUTLET THREAD TYPE | NPSM |
| AMPERAGE (A) | 15 |
| APPLICATION | Spray Foam |
| APPLICATOR TYPE | Manual |
| COMPATIBLE MATERIAL | Plural Components |
| COMPONENT TYPE | Two Component |
| FLUSH TYPE | Solvent |
| FREQUENCY (HZ) | 50/60 |
| HOSE LENGTH (FT) | 35 |
| HOSE LENGTH (M) | 10.7 |
| INCLUDES | Proportioner, Unheated Hose |
| MATERIAL APPLICATION | Polyurethane Foam |
| MAXIMUM FLOW RATE (KG/MIN) | 5.44 |
| MAXIMUM FLOW RATE (LB/MIN) | 12 |
| MAXIMUM FLUID TEMPERATURE (°C) | 71 |
| MAXIMUM FLUID TEMPERATURE (°F) | 160 |
| MAXIMUM MIX RATIO | 1:1 |
| MAXIMUM WORKING PRESSURE (BAR) | 140 |
| MAXIMUM WORKING PRESSURE (KPA) | 1400 |
| MAXIMUM WORKING PRESSURE (PSI) | 2000 |
| OVERALL DEPTH (CM) | 76.2 |
| OVERALL DEPTH (IN) | 30 |
| OVERALL DEPTH (MM) | 762 |
| OVERALL HEIGHT (CM) | 111.8 |
| OVERALL HEIGHT (IN) | 44 |
| OVERALL HEIGHT (MM) | 1118 |
| OVERALL WIDTH (CM) | 67.3 |
| OVERALL WIDTH (IN) | 26.5 |
| OVERALL WIDTH (MM) | 673 |
| PHASE | 1 |
| POWER RATING (HP) | 4.69 |
| POWER RATING (KW) | 3.5 |
| POWER RATING (W) | 3500 |
| POWER SOURCE | Electric |
| PRESSURE TYPE | Low Pressure |
| PRODUCT TYPE | Plural Component |
| SOUND PRESSURE LEVEL (DB(A)) | 84.5 |
| TANK CAPACITY (GAL) | 7 |
| TANK CAPACITY (L) | 26.5 |
| TYPE | Proportioner Package |
| WEIGHT (KG) | 7.2640 |
| WEIGHT (LB) | 160 |
| WETTED MATERIAL | Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
| AIR OUTLET SIZE (MM) | 6.35 |
| MODEL | Reactor |
| SERIES | E-10 |
| PRODUCT SERIES | Non-Elite |
| VOLTAGE (V) | 120 |
| HOSE PACKAGE | Includes Hose |
